Kerry M. Beam
3637 Almeria Dr.
Modesto, CA 95356
Phone:  [Send email to request phone number] 56-8026
E-mail: 

Summary:
Proficient in producing drawings using Micro Station & AutoCAD. To create
Outdoor substation drawings such as, Civil plans, foundation plans, tower and
structure layouts. To create Indoor drawings such as, connection diagrams, One
Line and Three Line diagrams, schematic diagrams, relay panels, and as-built
drawings. I all so have experience with the following CADD platforms: IseCAD,
VersaCAD, Micro Station Cornerstone, Micro Station V8, MacCAD, P-CAD, and
Intergraph.

Job Objective:
ELECTRICAL DRAFTER, 28 years experience

EXPERIENCE:

Job Title: Sr Drafter
Employer: Black & Veatch
Dates: 9/08 to 10/09
Duties:
Proficient in producing drawings using Micro Station. Created detailed
substation drawings for PG&E. Outdoor drawings such as, civil plans, foundation
plans, tower and structure layouts. Indoors connection diagrams, One Line and
Three Line diagrams, schematic diagrams, relay panels, and as-built drawings.
Issued drawing complying with PG&E, IEEE, ANSI 14.5y, and the National CAD
Standards.

Job Title: Sr Drafter
Employer: Crest Point Solutions
Dates: 4/06 to 9/08
Duties:
Proficient in producing drawings using paper space/model space. Created
New As-Built drawings of existing facilities. Created Floor Plans, Cable Rack
Plans, Equipment layout drawings, Grounding Plans, Fiber Plans, HVAC & Fire
Suppression plans, and lighting and AC/DC plans for the Telecommunications
Industry.

Job Title: Sr Drafter
Employer: KMB Drafting
Dates: 5/01 to 4/06
Duties:
Proficient in producing drawings using paper space/model space. Created
One Line Diagrams for substations and switching stations, loop diagrams,
schematics, homeruns, panel schedules, conduit layouts and lighting plans.
Performed field verification to ensure As-Built conditions of existing drawings.
Performed pick-up drafting of ECN's, DCN's, and RPO's.

Job Title: Sr Electrical Designer/Drafter
Employer: Fluor Federal Services, Richland, WA
Dates: 4/96 to 5/01
Duties:
Proficient in building CAD libraries of detailed drawings for reuse in the
AutoCAD system. Created One Line Diagrams for substations and switching stations,
loop diagrams, schematics, homeruns, panel schedules, conduit layouts and
lighting plans. Project manager in the creation of an "Off Site Vendor CD"
containing default drawing sheets, symbol libraries, pull down menus, site
standards and specifications. Interacted with the other department and managers
to complete this project. Lead designer of the electrical design team
retrofitting the substations and switching station on the Hanford Nuclear
Facility. Successfully preformed quality assurance to verify As-Built conditions
of existing drawings.

Job Title: Electrical Design/Drafter
Employer: ICF Kaiser Engineers, Richland, WA
Dates: 4/93 to 4/96
Duties:
Lead designer responsible for converting existing electrical Mylar drawings to
CAD. Field verified existing drawings and generated Engineering Changed Notice
(ECN'S) and Design Change Notice (DCN'S) to revise the drawings. A revised
drawing as per issued ECN's and DCN's to reflect As-Built conditions of new or
existing buildings. Tested different CAD programs to increase productivity and
reliability of the existing system. Was instrumental in the development of a
mapping program used to map all of the electrical power lines, transformers,
substations, and switching stations of the 500 square mile site.

Job Title: Electrical Design/Drafter
Employer: Westinghouse, Richland, WA
Dates: 11/92 to 4/93
Duties:
Proficient in building CAD libraries of detailed drawings for reuse in the
AutoCAD system. Created One Line Diagrams for substations and switching stations,
loop diagrams, schematics, homeruns, panel schedules, conduit layouts and
lighting plans. Field verified existing drawings and generated Engineering
Changed Notice (ECN'S) and Design Change Notice (DCN'S) to revise the drawings.
Revised drawings as per issued ECN's and DCN have to reflect As-Built conditions
of new or existing buildings.

Job Title: Electrical Design/Drafter
Employer: Boeing Facilities, Renton, WA
Dates: 1/90 to 11/92
Duties:
Field verified existing drawings and generated Engineering Changed Notice
(ECN'S) and Design Change Notice (DCN'S) to revise the drawings. Revised drawings
as per issued ECN's and DCN have to reflect As-Built conditions of new or
existing buildings. Created loop diagrams, schematics, homeruns, panel schedules,
conduit layouts and lighting plans. Instrumental in starting an On the Job
Training (OJT) program for a local community college. This program was design to
give drafting students some practical experience in a production environment

Skills:

Able to work as a member of a team, self motivated and a self starter,
Windows 2003 Server, Windows XP PRO, MS WORD, MS EXCEL

Education:

Institute of Technology (Network Software Engineer)
Clackamas Community College (Electrical Design)

CA Drivers License Class: C (passenger car)